4B EngraverGift tag
45 x 32 mm gift tag with a ribbon hole - a name on one face, a short message or your logo on the other. About 12 per plate.
What fits on it
These are measured on the actual geometry, not estimates. A recessed stroke narrower than 0.8 mm closes up on a 0.4 mm nozzle, so anything below that is thickened automatically or refused.
| Size | 45 x 32 x 2.6 mm |
|---|---|
| Material | 3.6 cm3 of filament |
| A name on its own | up to 8.3 mm tall, 1.95 mm strokes (set sideways to use the longest clear strip) |
| Name plus a serial | 7.8 mm tall |
| Logo face | logo up to 22.0 mm across |
| Deepest safe engraving | 1.8 mm (1.2 mm is the default) |
How to personalize it
One face carries a logo - the built-in one or a PNG/JPG you upload - with an optional serial number underneath. The other face carries exactly one of a name, a serial number or a logo. You get a live 3D preview, then a Bambu Studio 3MF (print profile and paint-on supports kept) and a plain STL. Batch mode numbers a run of them consecutively and returns one zip. No sign-up, and files are deleted after 7 days.
Printing it
Designed by 4Brains with parametric code, so it prints flat with no supports. Tested on a Bambu Lab H2S with a 0.4 mm nozzle at 0.12 mm layers in PLA on a textured PEI plate. The default 1.2 mm engraving is ten layers deep, which is also enough to fill with a second color at a filament swap - see how deep an engraving should be and the smallest text a 0.4 mm nozzle can print.
Try it on your own model. Upload an STL or 3MF, add a logo, a name or a serial number, and download a print-ready file.
Open the engraver — free