Free models to personalize

4Brains Technologies · updated 26 August 2026 · measured on Bambu Lab hardware with a 0.4 mm nozzle

Models

Free models designed by 4Brains, ready to carry a name, a logo or a serial number. Every one prints flat without supports.

Asset ID plate

60 x 30 mm screw-mount equipment plate, 2 mm thick, with two countersunk 3.4 mm holes. Built for batch runs: logo plus A

Storage bin label

60 x 22 mm clip-on label plate, 2.6 mm thick, with a 45 degree reading angle cut into the back so it sits proud of a dra

Cable label

Zip-tie cable marker: 40 x 16 mm plate, 2.4 mm thick, with two 3 x 8 mm slots so a cable tie wraps it onto a cable or a

Coaster

90 mm round drinks coaster, 4 mm thick with a chamfered rim. A big flat face for a logo - the usual choice for branded g

Desk plaque

120 x 40 mm plaque, 6 mm thick with chamfered edges - a name plate that lies flat on a desk or screws to a door. Both fa

Filament swatch card

50 x 30 mm filament sample card with a four-step opacity ramp along the bottom and a 4 mm hanging hole. Engrave the bran

Gift tag

45 x 32 mm gift tag with a ribbon hole - a name on one face, a short message or your logo on the other. About 12 per pla

Numbered key fob

45 x 22 mm locker or hotel key fob with a 6 mm ring hole, 3 mm thick. Serial-first: run off a numbered set in one batch.

Keychain tag

Rounded 50 x 25 mm keyring tag, 3 mm thick, with a 4 mm ring hole. Prints in about 15 minutes with no supports.

Kids name tag

40 x 18 mm tag with a rounded strap slot for a backpack, water bottle or pencil case. Prints in about 4 minutes, so a wh

Luggage tag

90 x 45 mm travel tag with rounded ends and a 5 mm strap hole, 3.5 mm thick. Room for a full name on one face and a phon

Christmas ornament - disc

70 mm round tree ornament with a raised rim and a 3.5 mm ribbon hole. A name and the year read clearly at this size.

Christmas ornament - snowflake

70 mm snowflake ornament, 3 mm thick, with a ribbon hole. The centre is left clear so a name or the year still reads.

Christmas ornament - star

70 mm five-point star ornament, 3 mm thick, with a 3.5 mm ribbon hole in the top point.

Pet tag

32 mm round collar tag, 2.5 mm thick, with a 3.5 mm split-ring hole. Pet name on one face, phone number on the other.

Plant marker

Garden label: 90 mm spike with a 45 x 22 mm head, 3 mm thick. Push it into the soil; the head carries the plant name.